| Customization: | Available |
|---|---|
| After-sales Service: | Available at Any Time |
| Warranty: | 2 Years |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
1.High Quality carbide strips ISO9001-2015 certified
2.Automatic pressing, HIP sintering technology
3.Good abrasion resistance and high hardness
4.Prompt aftersales service within 24 hours
5.OEM and customzied order are accepted
Tungsten carbide plates/sheets/flat stocks are widely used in molding, woodworking, recycling, and chemical industries where excellent wear, corrosion, or high-temperature resistance is required Blanking punch dies, woodworking cutters, shredder blades, machine tool guideways, corrosion-resistant parts for the chemical industry, radiation-resistant parts for armariums, etc.
| Grade | Equal to ISO Category Number | Performance | Performance&application recommended | ||
| Density G/Cm 3 | Bend Strength N/mm 2 | Hardness HRA | |||
| YG3 | K01 | 14.9-15.3 | ≥1180 | ≥90.5 | Sand-blasting nozzles qualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting n |
| YG3X | K01 | 15.1-15.4 | ≥1300 | ≥91.5 | |
| YK05 | 14.95 | 2500 | 90.5 | Mostly used as the buttons of small and bits medium sized percussion | |
| YG8C | 14.8 | 2400 | 88.5 | and as the inserts of rotary prospecting bits to cut soft and | |
| medium hard formations. | |||||
| YG6 | 14.95 | 1900 | 90.5 | For coring crowns,electric coal drill bits, coal cutting picks,oil | |
| cone bits and scraping knife bits,used in coal geological prospecting, | |||||
| mining and oil well boring. | |||||
| YG6X | K10 | 14.8-15.1 | ≥1560 | ≥91.0 | Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. |
| YG6A | K10 | 14.7-15.1 | ≥1580 | ≥91.0 | |
| YG6 | K20 | 14.7-15.1 | ≥1670 | ≥89.5 | Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. |
| YG8 | K30 | 14.6-14.9 | ≥1840 | ≥89 | Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. |
| YG10X | 14.5 | 2400 | 91.5 | Fine grain alloy, good wear resistance,Used for processing hard | |
| wood, veneer board,PCB,PVC and metals. | |||||
| YG11 | 14.4 | 2600 | 88.5 | Forming or stamping dies for metal powders and nonmental powders. | |
| YG11C | K40 | 14.4 | 2700 | 86.5 | Largely for the inserts and buttons of percussion bits and tricone bits to cut medium |
| hard, hard and very hard formations. | |||||
| YG15 | K40 | 14 | 2800 | 87.5 | For fabricating drawing dies of steel tubesand rods under high |
| compressibility ratio;punching,stamping,forging tools under large stress. | |||||
| YG15C | 14 | 3000 | 85.5 | For oil cone dril bits, for medium soft and medium-hard rocks. | |
| YG16C | 13.9 | 2900 | 85.5 | Impact resistance, hot&forging dies etc. | |
| YGH40 | 13.5-13.9 | ≥2450 | ≥83.0 | Mainly for making hot dies. | |
| YG20 | 13.5 | 3200 | 85.5 | For fabricating of stamping dies for watch parts, spring plates of musical | |
| instruments, battery jars,small sized steel balls,screws,screw caps. | |||||
| YG18C | 13.7 | 3100 | 84.5 | Impact resistance forging dies,hot-press forging dies and rollers. | |
| YG20C | 13.5 | 3300 | 83.5 | Dies for wear resistant or impact resistant application. | |
| YG22C | 13.3 | 3500 | 83 | Nut forming dies and high impact resistance forging dies. | |
| YG25C | 13.1 | 3600 | 82.5 | Stainless bolt header dies and rollers. | |
| YT15 | P10 | 11.1-11.6 | ≥1180 | ≥91.0 | Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel. |
| YT14 | P20 | 11.2-11.8 | ≥1270 | ≥90.5 | Qualified for rough machining for rough face of carbon steel and alloy steel, half process during discontinuity cutting. |
| YT5 | P30 | 12.5-13.2 | ≥1430 | ≥89.5 | Qualified for rough machining for rough face of carbon steel and alloy steel and discontinuity cutting. |
Physical and mechanical properties of grades for tungsten carbide strips,tungsten carbide flat bar,carbide plates
Q: Are you trading company or manufacturer ?
A: We are a Group company , manufacturer of tungsten carbide since 1989 and
professinal own export company,and we We can supply 20 tons tungsten carbide product per month. We can provide customized carbide products as per your requirements.
Q: How long is your delivery time?
A: Generally,it will take 7 to 15 days after order confirm.The specific delivery time depends on the specific product and the quantity you needed.
Q: Do you provide samples? iIs it free or charged?
A:Yes, we can offer a sample for free charge but the freight is at customers' cost.
Q. Do you test all your goods before delivery?
A: Yes, we will do 100% test on our cemented carbide products before delivery.
To offer you the quick and professional service,please provide us the following information:
Tungsten carbide grades
Type / dimension / draft
Available tolerance
Available surface toughness
If you have no idea above information,please contact us freely
Sophia Sun
){kind=link}